Paint Instructions

Mixing ratio is 4:1. Four parts clear to 1 part hardener. Use approximately 30psi to laydown the clear. 2 or 3 light coats with 5-7 minutes in between coats. then a good saturation coat. Let it dry for at least 4-8 hours or until the tackiness is gone. Be careful here because the clear may still be soft.

Mixing ratio is 4:1. Four parts paint to one part hardener. Recommend 30psi for your airbrush. I use a .5 needle but a .3 will work with Spectre Flame paint. Use Diecast Graveyard Hardener with your Spectre Flame paint. two or three mist coats with 7-10 minutes in between coats. Then one saturation coat. Let it dry overnight for best results. Remember, the more coats of paint you apply, the darker the color. Also be careful when applying light colors like Anti-Freeze. Before you see the color, it will run, so be careful.